What is the wooden doors production

The main wooden doors can be classified as: Solid wooden doors, solid wood composite doors, no spray paint doors.

No spray paint doors briefing process and the necessary equipment: Now no spray paint doors manufacturers generally have the following complementary products: 1, Door board 2, door sheeting lines, 3, wooden Slabs. Now, respectively, the above-mentioned production process and equipment for a brief introduction:

1.Door board a. Porto systemic the manufacturing process are two kinds of common: flat plate, fabricated plate. Fabricated structure can refer to solid wood composite door

Generally flat plate consist by door board, the main frame, filling materials, the door sheeting line. 

b.Most door slab with 8mm thick MDF material according to the required size, after engrave the pattern by engraving machine then vacuum absorption, make it to semi-manufactured goods.

The necessary equipment: MJ6128 Precision saw, woodworking engraving machine, vacuum coating machine, spray equipment,etc.  

c.The main frame often used 30 × 30mm cross-section of drying wood, which can use wood planer processing to the required size, according to the size of make into the door, like shaped framework. The necessary equipment: MB102 woodworking planer, MJ6128 Precision saw, air nail gun, etc.  

d.Most of the door sheeting line be made of dovetail tenon structure, is generally used 10mm MDF narrow sheeting, then used four side moulder make into shaping, and then coated PVC membrane made of spare parts. The necessary equipment: see (refer to  2.door sheeting lines, other wood sheeting line)  

e.Filling material used to increase the strength of door products to improve the insulation, thermal insulation, such as performance, in the door, the main frame, the door into a portosystemic pressure be filled in before the door between the main framework. Common fill material compressed paper honeycomb, honeycomb panels, specialize in the production of domestic manufacturers of such materials, there are a variety of sizes to choose from, users can also be customized.  

f.Upon completion of the various parts of the above combination of parts,Coatting glue,then use cold press machine press the door, two hours.

The necessary equipment: cold press machine.MJ6128 Precision saw, hand coating machine, etc.  

2,door sheeting lines, and other wood sheeting line. Because the wood line after molding need to be coated with PVC-coated membrane, it has two characteristics: mass produce, size accurate control.So this require to ensure reliable equipment. The most appropriate equipment is Four Side moulder.

Equipment production lines machine: MJ6128 Precision saw, Four Side moulder., multi-function Line Sheeting machine

3, wooden Slabs wooden Slabs is a popular saying in the business,it generally refers to the 1220 × 2440mm plate. The most commonly used thickness is 3mm specifications, manufacturers just posted a PVC membrane on one side of MDF, after trimming to the factory, use as a decorative material. The necessary equipment: (PVC)Sticking Machine 

Solid wooden doors, solid wood composite doors briefing process and the necessary equipment:

At present, domestic most of the solid wood composite doors are solid wood exterior doors, in Zhejiang Yongkang manufacturers have done a considerable portion of the bread pieces, woven stripe design, on the basis of dissection was also developed with the fire doors, security doors and even bullet-proof doors, very popular with the market. Its production proces is sample. First the production of various parts, and then complete the combination, but there is solid wood composite doors last painting process.,Nowl respectively, the door body, bread pieces, door sheeting,the basic process with the necessary equipment to do a brief introduction:  

1.Door Edge. Gate cross-file.

a.Comparison of these two parts is similar. the general cross-section size is 12 × 4cm, do one or both sides of the Kok Yin line and slotted modeling.then assemble with the Most of the middle to do with the door Panel. Most of the middle to do with the core splicing miscellaneous tree on three sides or two sides of 5mm MDF paste, and finally cover the surface of paste made of solid wood skin

b.The necessary equipment: high-speed planer pressure, precision panel saw, hot-pressing machine, Four Side Moulder, etc. Sticking 4cm wooden doors veneer edge can choose a straight line machine, do lots of veneer splicing .put pressure will be used for veneer cutting machine, Splicer Mchine, etc.

2. door core, bread pieces,

This types are generally made with MDF surface paste style leather cover made of solid wood. The necessary equipment: precision panel saw, Four Side Moulder, vertical milling, Vacuum

Curved Surface Covering Machine (Contains silica gel plate), etc.  

3. sheeting line, baseboard line

In addition to MDF substrate, also can choose to use finger- miscellaneous tree, composite board, etc. After paper wood on the wood surface,then polished , colored. Painting .The necessary equipment: precision panel saw, Four Side Moulder, hot glue Sheeting Machine.if you want to do finger joint wood ,it need high-speed pressure plane, Shaped Mahine, Finger Join Machine, etc.

4, Assembly

After completion of the parts assembly process is followed, that is, to the door, the door

cross-file,door core board together, bread or pieces of woven stripe design is assembled after the

completion of the bonding.

The necessary equipment: wooden door assembly machines, cold press, etc.  

5, Painting

This is the the last step of solid wood doors and solid wood composite door production, of course,

painting equipment is necessary, if do paint drying, it nees paint drying room.

Some additional information:

1, It also need some necessary small power tools that not mentioned above. such as: air nail gun, air

compressor (air pump), grinding tools, grinding table(optional), etc.

2, because we are not manufacturers of all woodworking professionals, it is inevitable that

omissions, addition of the wooden doors factory production and quality requirements vary, this

information can reference only.